1300–1500MHz 10W/20W TX RF Amplifier for Drone & UAV Platforms | Chipomi

1300–1500MHz High-Power Unidirectional TX Amplifier for Drone & UAV Signal Enhancement is engineered for professional FPV and UAV platforms requiring reinforced transmit (TX) paths. The module operates within the 1300–1500MHz band and enhances compatible control and data transmission links.

With 40/43dBm (10W/20W) output power and 40±1dB gain, it increases operational range and improves signal stability in urban or obstructed RF environments. The amplifier operates from a 24V DC supply, aligning with standard onboard drone power architectures.

The compact 96x53x17mm aluminum housing provides durability and efficient heat dissipation during high-output operation. The supplier specifies stable power requirements and recommends proper cooling for sustained use.

Technical Specifications:

Why Choose This Module:

• TX-only architecture for transmit-path enhancement.
  
• 1300–1500MHz band supports dedicated UAV control applications.
  
• 10W/20W output increases range and signal robustness.
  
• 24V operation matches common drone power systems.
  
• SMA-Female connectors allow straightforward RF integration.
  
• Compact 96x53x17mm housing suits onboard drone installation.

Applications:

• TX-chain integration in UAV and FPV platforms.
  
• Control and command signal reinforcement.
  
• Long-range drone communication systems.
  
• Operation in urban or obstructed RF environments.
  
• RF engineering and integration projects.
  
• Ground-side transmit modules in compatible UAV systems.

Package Includes:

1 x Power Amplifier Unit

Important Notes:

• Requires 24V / 4A power supply.
  
• Heat dissipation (heatsink or fan) is recommended for sustained high-power operation.
  
• Connection order: connect antenna first, then power, then signal source device.
  
• Output can reach up to 47dBm with +10/11dBm input power (at default gain).

FAQ:

1. Is this amplifier designed for RX operation?
   No, it is strictly for the transmit (TX) path.
2. What power supply is required?
   A stable 24V DC power supply rated at 4A or higher is required.
3. Is it suitable for drone control signal enhancement?
   Yes, the 1300–1500MHz band and 10W/20W output are intended for control and data link reinforcement.
4. Is additional cooling necessary?
   For sustained high-power operation, proper heat dissipation is recommended.
5. What is the correct connection sequence?
   Antenna first, then power, then connect the signal source.
6. Are custom configurations available?
   Yes, custom power and frequency configurations are supported by the supplier.

The ACASOM 1300–1500MHz 10W/20W unidirectional TX amplifier available on Chipomi is designed for professional drone and UAV signal enhancement. Operating exclusively in the transmit path, it reinforces compatible control and data transmission links within the 1300–1500MHz band.

With 40/43dBm output power and 40±1dB gain, the module increases operational range and improves link stability in challenging RF environments such as urban areas or obstructed flight paths. It operates from a 24V DC supply, aligning with common onboard drone architectures.

SMA-Female connectors on both input and output support easy RF integration, while the compact 96x53x17mm aluminum housing enables efficient heat dissipation during sustained high-output operation. The supplier specifies a 24V / 4A power requirement and recommends additional cooling for continuous use.

For UAV systems operating in the 1300–1500MHz range that require transmit-path reinforcement, this compact high-power amplifier provides clearly defined specifications and integration flexibility. Order from Chipomi to enhance your drone communication system.